工藝原理：
Process principle:
在脫硫塔內，沼氣中的硫化氫和氫氧化鈉進行中和反應，反應后的產物為硫氫化鈉和水，去除沼氣中的硫化氫；然后再利用生物菌的作用，將硫氫化鈉還原成氫氧化鈉和單質硫。
In the desulfurization tower, the hydrogen sulfide and sodium hydroxide in the biogas are neutralized, and the reaction product is sodium hydrogen sulfide and water to remove the hydrogen sulfide in the biogas; Then, sodium hydrosulfide is reduced to sodium hydroxide and elemental sulfur by using the role of biological bacteria.
步：脫硫反應塔內的化學方程式：
Step 1: Chemical equation in desulfurization reaction tower:
H2S(G) + OH - → HS(L) + H2O
H2S(G) + OH - → HS(L) + H2O
第二步：再生池內的化學方程式：
Step 2: Chemical equation in regeneration tank:
HS(L) + 1/2O2 → S + OH-
HS(L) + 1/2O2 → S + OH-
運行過程：
Operation process:
沼氣通過脫硫反應塔將沼氣中H2S從氣相轉化成液相，脫硫反應塔就是一個洗滌塔。沼氣從塔底部進入并穿過濾料床。循環水從塔頂進入，經過專用噴頭打散，自由落體穿過濾床，專用濾料可以使沼氣與循環水進一步打散和延長接觸時間，提高洗滌效果。含有硫化物的循環水從脫硫反應塔底部流入再生池。
The biogas converts H2S in the biogas from the gas phase to the liquid phase through the desulfurization reaction tower, which is a scrubber. The biogas enters from the bottom of the tower and passes through the filter bed. The circulating water enters from the top of the tower, disperses through the special nozzle, and the free falling body passes through the filter bed. The special filter material can further disperse the biogas and the circulating water, extend the contact time, and improve the washing effect. Circulating water containing sulfide flows into regeneration tank from the bottom of desulfurization reaction tower.
再生池完成循環水中硫化物被氧化的過程，再生池內創造循環水中脫硫菌的生存環境，再生池內的加熱盤管給循環水提供熱量，保證循環水溫度在30-33度之間。曝氣頭給循環水提供氧氣，保證循環水適當?shù)娜芙庋酢?/div>
The regeneration tank completes the process of sulfide oxidation in the circulating water. The regeneration tank creates a living environment for desulfurization bacteria in the circulating water. The heating coil in the regeneration tank provides heat for the circulating water to ensure that the temperature of the circulating water is between 30-33 degrees. The aerator provides oxygen to the circulating water to ensure proper dissolved oxygen in the circulating water.
工藝流程示意圖：
Process flow diagram:
工藝特點：
Process characteristics:
①脫硫過程中除向再生池通入少量空氣外和少量堿液，不需再額外添加催化劑和氧化劑；
① In addition to a small amount of air and a small amount of lye into the regeneration tank during the desulfurization process, no additional catalyst and oxidant need to be added;
②不需處理化學污泥；
② No need to treat chemical sludge;
③產生很少生物污染，低能耗，效率高且穩定，無臭味；
③ It produces little biological pollution, low energy consumption, high efficiency and stability, and no odor;
④技術含量高，但易控制，只需要對操作人員進行一周培訓（高中文化）。
④ High technical content, but easy to control, only one week of professional training (high school culture) is required for operators.
This article is released by biological desulfurization finishing. Do you know something about these contents? For more information, please click: http://www.2108kk.com We will have more wonderful content waiting for you to check.
魯公網安備37011202000764號號 網站地圖XMLTXT
企業二維碼
2023-02-13
